The Chassis
We have suspended the body over the pan as we replace the pan halves. With the body off the pan, we can easily repair any rust on the pan and replace both pan halves.
Removing the body has also revealed a twist in the frame, most likely from the accident. A twist here means a likely twist in the body also. We'll address that after we get the pans installed.
Pan Repair
 |
 |
 |
| Body is suspended | Left floorpan is still fairly solid appearing | Left floorpan is still fairly solid appearing |
 |
 |
 |
| Left rear floor pan had been previously patched | Right pan is nearly all removed | Left pan removed |
 |
 |
 |
| Left frame head is in tough shape | Repair to the left frame head | Dick the tech at work |
 |
 |
 |
| Right side frame head repair | Rear is ground down | Pan half is punched out for spot welds |
 |
 |
 |
| Right pan is installed | Both pans are in | Pans are in |