Reconstruction
The test fitting went well enough to begin welding. We'll get the left fender welded in first and then work our way around the front to the right fender wall.
It is critical that we also test fit the hood prior to the final welding to ensure a tight seal once the car is back together.
Final assembly
 |
 |
 |
| The left fender wall is welded in at the hinge post. | There are dozens of spot welds to fill | The welding is done, now onto griding them smooth |
 |
 |
 |
| A look from the side | The nose is also welded on and getting ready for the right side fender wall | The right fender wall is welded on. All that's left is a bit of grinding to return it all to a factory look. |
 |
||
| The grinding is complete. After a couple of small rust holes are patched up, Dick will move onto the rear package shelf R and R. |